Ready-made cam for payment systems at gas stations, parking terminals, self-service kiosks and other payment terminals.
These cam can be installed on any NFC reader in any country that uses the Ingenico NFC reader shown in the photo.
The cam is designed to look exactly like the original NFC reader, so users won’t even notice it.
The cam housing is made of a durable, flexible plastic that won’t crack, even if it’s dropped or bumped. This makes it easy to install and remove without damaging the cam.
Upon customer request, NFC shielding can be installed in the camera. Development of an MITM NFC reader is underway. The camera has two types of electronics: continuous recording and motion detection.
Continuous recording camera:
Equipped for 8 or 14 hours of operation
Has a resolution of 640 x 480
Requires a MicroSD card with a speed class greater than 10 from a major manufacturer (do not use NONAME Chinese)
Motion detection camera:
Records automatically using a laser rangefinder that acts as a human detector
The image above shows the barely visible detector (gold dot) circled in red
Records in 640 x 480 on MicroSD
The resolution can be changed through a settings file on the same MicroSD
The camera can operate for 80 to 150 hours depending on the type of battery installed
Ready-made pad for payment systems at gas stations, parking terminals, self-service kiosks and other payment terminals.
The Gilbarco 5000 is one of, if not the most, popular pin pad models on the planet.
Our pin pad is an exact replica of the original 5000 series. The buttons are made on CNC from aluminum with plastic colored inserts 1 in 1 as on the original keyboard. Our device is 4mm thick.
You can choose to order with an aluminum or plastic body (the original is made of plastic). In both cases, the device is additionally reinforced with a steel frame. The buttons are always aluminum.
The electronics are based on CR1216 batteries and an ARM microcontroller. The approximate operating time on one battery is 1000-2000 hours. Ultra-thin buttons with an ultra-short stroke and an extremely low pressing force of 80 grams are used. Data is recorded to external EEPROM in the EE:DDD:HH:MM:SS:XXXX……XXXX format. Where EE is the power-on number, DDD is the day, HH is the hour, MM is the minute, SS is the second, and XXXX…..XXXX are the entered characters. Data is read through any terminal application using a UART-USB adapter.
Ready-made pad for payment systems at gas stations, parking terminals, self-service kiosks and other payment terminals.
The INGENICO IUN230 is one of, if not the most, popular pin pad models on the planet.
Our pin pad is an exact replica of the original IUN230 series. The buttons are made on CNC from aluminum. Our device is 3mm thick.
Аn aluminum body. In both cases, the device is additionally reinforced with a steel frame. The INU230 comes in several different modifications and color schemes. We can manufacture the case specifically for your country by making minor changes. For example, in Italy, cases with raised lines are common, while in the CIS countries, cases with raised domes are common. As shown in the photo above.
The electronics are based on CR1216 batteries and an ARM microcontroller. The approximate operating time on one battery is 1000-2000 hours. Ultra-thin buttons with an ultra-short stroke and an extremely low pressing force of 80 grams are used. Data is recorded to external EEPROM in the EE:DDD:HH:MM:SS:XXXX……XXXX format. Where EE is the power-on number, DDD is the day, HH is the hour, MM is the minute, SS is the second, and XXXX…..XXXX are the entered characters. Data is read through any terminal application using a UART-USB adapter.